Indiana Daily
    • News
    • Business
    • Economy
    • Real estate
    • Culture
    • Travels
    • Society
    Indiana Daily
    Home»Economy»Tile for the bathroom. Features of masonry tiles

    Tile for the bathroom. Features of masonry tiles

    13.01.2022

    Bathroom tiles are considered a non -alternative option for wall cladding in this room. This is due to the features of the microclimate in this room and the properties of the material. which is quite suitable for a humidity mode inherent in the bathroom and change temperature.

    Modern manufacturers offer a fairly large selection and you can buy tiles for the bathroom both inexpensive and elite . In the cabin of ceramic tiles, ordering a bathroom tile in St. Petersburg can be at the best price.

    Tiles are a good tool to decorate the walls and protect them from moisture, it is most often lined with the bathroom and the kitchen. Starting the laying of the tiles, it is necessary to prepare the wall, cleaning it with a spatula. If the wall is smooth, then for better adhesion of tile glue with a wall, and to get rid of dust, you need to treat it with a special primer. Next, it is necessary to measure from the floor the distance of one tile height plus another half a centimeter, and then put the level then draw a line, and put an even wooden or metal beam under the drawn line. Dilute tile glue as written in the instructions, type a little glue on a metal spatula, apply glue to a gear spatula, and apply it evenly to the tile from the back.

    Attach tiles to the place where the line was drawn and press it. Thus lay the first row with tiles, insert crosses between the tiles, so that there is the same distance between them. After the upper row is completely laid, you can remove the bar attached under the first row, so as not to let the tiles leave in the first stages of laying. When they removed the bar, you need to lay out the entire lower row. When they put the tile, it is good to leave the extreme row, which requires trimming, and at the end, when all the tiles are laid completely, cut the remaining tiles and lay out the extreme row. It is necessary to wait for the glue to dry for at least 6 hours, well clean the seams between the tiles, fill them with a grouting mixture with a rubber spatula. After drying the mixture, wipe the rest with a damp cloth.

    Add A Comment

    Leave A Reply Cancel Reply

    Captcha loading...

    Crypto Currency
    Name Price24H (%)
    bitcoin
    Bitcoin (BTC)
    $69,454.00
    0.19%
    ethereum
    Ethereum (ETH)
    $3,669.79
    -0.50%
    tether
    Tether (USDT)
    $1.00
    -0.03%
    USDEX
    USDEX (USDEX)
    $1.07
    -0.47%
    binancecoin
    BNB (BNB)
    $647.43
    -5.09%
    Solana
    Solana (SOL)
    $159.56
    0.05%
    Lido Staked Ether
    Lido Staked Ether (STETH)
    $3,668.81
    -0.49%
    usd-coin
    USDC (USDC)
    $1.00
    -0.03%
    ripple
    XRP (XRP)
    $0.496029
    0.35%
    dogecoin
    Dogecoin (DOGE)
    $0.144848
    -0.81%

    A wide selection of Audi cars for rent in Dubai from Yeti

    30.05.2025

    Upgrade your vehicle’s shine with carrectly’s 3-year ceramic coating services in Chicago

    29.05.2025

    Елементи фіксації як надійна основа для стабільної та безпечної роботи конструкцій

    18.05.2025

    Як вибрати кавомолку для дому: практичний гід для кавоманів

    16.05.2025

    Що таке резиновий м’яч для фітнесу і як ним користуватись

    15.05.2025
    © 2025 IndianaNews State - indiana-daily.com

    Type above and press Enter to search. Press Esc to cancel.