Repair step by step
When you accurately decided on the repair of the apartment, you decided on the style and found good workers to start the process itself. The first stage is the layout, after repair. In order to better imagine the picture, you need to use your ability to draw and draw. It is necessary to measure each room, and then transfer all these sizes to paper from top to bottom.
Next, you need to measure all the furniture and its sizes also transfer to another sheet of paper. On the size of the furniture, it is necessary to enter its names: table, cabinet, bed, etc.D. Then cut it all out and glue it to the paper, where you previously inflicted the size of the rooms. On the sheet you can see where and how best to arrange furniture. This option makes it possible to correctly calculate all the passages so that the furniture does not stand too close to each other. When you have done a mini repair project, you can start repairing. The sequence of repair work is affected by the condition of the apartment. If the apartment is old, then in it the repair begins with the breakup of all walls and partitions. The cover of the floor, walls and ceiling is removed.
This repair stage is the most dirty and dusty. There are such houses in which the apartments are old, but the parquet in them is very good. In order not to remove it, you can cover it with plastic film and organ, but at the same time you will still have to cycle parquet. When the parquet thickness, after numerous cycling procedures, decreased, it subjects the parquet to wear and the high probability that another parking lot will simply not withstand.
The most dusty stage is the replacement of windows, slopes and window sills (if such a procedure is planned). This procedure is done at the first stage of the repair, t.to. you cannot change the sequence of repairs of quaritics. And when painting will be carried out, the windows cannot be opened at all. After the windows are installed and all work on the installation of slopes and window sills are completed, the windows must be covered with a film, and the window sills of the organ, this is to prevent scratches. Then you need to do an electrician. First, decide where to put additional sockets, make wiring under them. The wiring can be laid in the walls or under the floor, this will make it possible to hide all unnecessary wires. The next step is to align the walls and ceiling.